Introducing our new hybrid Magnesium Oxide/OSB SIP Panel for a highly efficient thermal envelope

May 15, 2017

We manufacture a standard range of SIP panels, these include an Egger board faced OSB panel and an Magnesium Oxide (MgO) faced panel. The advantages of MgO is that there is no need for an outer leaf, e.g. brick or block, the panels can be rendered directly on to the surface, or battened for timber cladding, brick slips etc. On the interior face MgO has a massive pull out strength, so hanging kitchen units directly without a dwang or noggin and if there are no electric or plumbing required on this wall then simply tape and fill for the finished wall, the panel has a 2 hour fire rating so is also suitable as infill panels in high rise buildings.

 

The new Hybrid panel allows the best of both worlds, the exterior face is the finished wall and the interior is OSB, ready for your service void to be installed. Using OSB as an interior facing brings down the cost of the panel and rationalises where the MgO is used to best effect.

 

Our system is approved by NHBC, Premiere, and LABC, this means customers will be able to get a 10 year warranty with most providers. 

Our building system has CATG SIP Mark scheme approval. 

Our manufacturers are ISO9001 approved for our quality management system. 

Our manufacturers have ISO14001 certification for environmental management.

All our engineered wood products have PEFC chain of custody certification. 

Our metal web eco joists are CE marked and designed and manufactured in-house.

Our manufacturers full members of the STA

 

Our new hybrid panels are to be used in several large build projects across the UK, we have a the capability to produce Hybrid panels to suit your specifications, for example we can use a laminate, aluminium, birch ply or similar to create the look and feel your project demands.

 

We manufacture for large housing developments down to small extensions, send us a copy of your drawings for an indicative cost estimate. Our teams of installers work across the UK and our system is used for rapid deployment, highly insulated thermal envelopes. We can also supply a range of windows and doors up to Passivhaus standards and can supply an innovative Heat Recovery and Ventilation system (MVHR) for all of our projects or for retrofitting.

 

Call Phil Slater for a chat on 07563 770981 or email phil@ecoenvelope.co.uk

 

 

Share on Facebook
Share on Twitter
Please reload

Featured Posts

introducing a new generation of ultra low energy 24 volt space heating systems using graphene super composites

February 20, 2019

1/10
Please reload

Recent Posts
Please reload

Archive
Please reload

Search By Tags